Load Hog helper springs work in conjunction with the existing springs,
making them one of the strongest and most effective suspension aids available today.

Load Hog helper springs consist
of a quarter-elliptical leaf spring
that is shackled via U-bolts and
cross plates to the top of the rear
half of the existing leaf springs.
The inner end of the helper spring
is rigidly shackled to "dead" area
of spring near the differential.
The outer end is shackled near the
existing spring shackle forming
an adjustable link that can be
set for any application.

Unlike other products that work independently of the main spring pack, Load Hogs clamps
onto the existing springs forming an integral part of those springs. A progressive action
is achieved by the unique patented design which varies the helper springs pivot point
depending on the amount of weight on the vehicle. As weight is added to a vehicle or
it enters a corner the effective length of the Load Hog spring becomes shorter and
therefore stiffer providing a ride that is more controllable and more stable when needed.

Load Hog helper springs are also adjustable, allowing you to set the springs to your exact
requirements. To adjust the ride height, a high-tensile steel U-clamp on the end of the
Load Hog can be loosened or tightened with a pair of lock nuts, increasing or decreasing
the curvature of the standard spring. The ride height can be adjusted or re-adjusted at any time.